|
e-Boost2
e-Boost2 is a natural evolution of the original
e-Boost. The feedback provided by the users proved
invaluable for continual development of the product
with many of the suggestions being incorporated
into the final design of the second-generation
unit.
e-Boost2 puts the user in total control of his/her
turbocharger. With a host of new features and
state-of-the-art software, e-Boost2 is the one
accessory all owners of turbocharged cars should
have! Easy to use, yet sophisticated and technologically
advanced, the e-Boost2 is equally at home in a
street-going vehicle as it is in a top-level racecar.
It's a tacho!
e-Boost2 displays RPM with a much greater accuracy
than the common analogue tachometer!
It's a boost gauge!
With high accuracy boost and vacuum display,
e-Boost2 outperforms most analogue boost gauges!
It's a shift light!
With an optional single or double LED ring,
e-Boost2 controls up to 2 warning/shift lights!
It's a NOS swtich!
With a fully programmable auxiliary output e-Boost2
gives you control over water spray, methanol
or nitrous injection!
It's a mother of all Boost Controllers!
 Up
to 6 alternate boost mapping functions with
specific boost mapping for FWD, RWD, AWD, Bike
and Drag racing applications.
A
specifically developed Correction Feature eliminates
boost drop-off at high RPM
Boost
levels can now be mapped against TIME or RPM
Special
gate pressure function eliminates wastegate
creep
Peak
Hold/Max Boost Recall function monitors the
boost and RPM
The
display can be configured to KPA, Bar or PSI
|
Features
Choice
of 40 or 60-psi models
Choice
of bezel/face colour combinations
Back-lit,
easy to access function buttons
Auto
dimming
Programmable
audible warning alarm
Advanced
short circuit protection
Suitable
for panel, gauge pod or pillar mounting
Easy
to read, 7-segment display with bar graph
Housing
and accessories made out of tough, billet
aluminium
Accessories
Single
or double LED ring. Available in bezel-matching
colours
Shift/warning
lights complete with a plug-in wiring loom,
available in four colours (Red, Green, Amber,
Blue)
Remote-mount
shift light Dash mounting kit.
Tough
and sturdy with tilt and directional adjustment
|
 |
|
| |
|
 |
Power Gate - 50mm
p/n FG-WG50
Extreme performance for extreme horsepower! Super
large flow, extreme temperature waste gate for high
horsepower race applications. Rated to continuous
1250 degrees C.
Investment
cast, stainless steel body
One
piece, high-temperature stainless steel, investment
cast valve
Silicone
Nomex diaphragm
Unique
temperature-isolation zone
Extra
high cap for maximum valve travel and increased
flow
Fully
compatible with all Turbosmart boost controllers
|
| |
|
 |
Pro Gate - 48mm
p/n FG-WGATE-48
Time proven reliability and extreme performance
has made the Turbosmart Pro-Gate the external wastegate
of choice by many of the world's fastest drag racers
and builders of hardcore horsepower machines. The
Pro-Gates design includes an investment cast Stainless
Steel body, a one-piece valve for strength and reliability
and the unique temperature isolation zone to reduce
heat transfer. The Pro-Gate is supplied complete
with a cast Stainless Steel Vee-band adapter kit
for quick and easy installation. We have successfully
used one Pro-Gate on engines producing up to 1000HP,
however in applications where the turbo is not suitably
matched to the engine, this figure may not be achievable.
Race
proven winner! Drag racers choice!
Extensively
developed body design and huge valve lift ensure
unrivalled flow
17-7
PH spring and Silicone Nomex diaphragm - durability
under extreme temperatures and stress
Optimum
actuator to valve ratio for precise boost control
Fully
compatible with all Turbosmart Boost Controllers
Supplied with
Vee-bands
and weld flanges |
| |
|
 |
Ultra Gate - 38mm
p/n FG-WGATE-38
The most compact 38mm wastegate on the market, featuring
the common two bolt flange design used by many turbo
kit manufacturers. The Ultra-Gate's design incorporates
a unique temperature isolation zone to reduce heat
transfer, a true 35mm inlet port for maximum flow,
an investment cast Stainless Steel body and one-piece
valve for strength and reliability. We have successfully
used one Ultra-Gate on engines producing up to 600HP,
however in applications where the turbo is not suitably
matched to the engine, this figure may not be achievable.
Ultra
compact 112mm overall height (4-inch) and 100mm
across (4 inch)
17-7
PH spring and Silicone Nomex diaphragm - durability
under extreme temperatures and stress
Optimum
actuator to valve ratio for precise boost control
Superior
body design and huge valve lift ensure unrivalled
flow
Supplied
with weld on steel manifold flanges and gaskets
Fully
compatible with all Turbosmart Boost Controllers
|
| |
|
 |
Street Gate - 38mm
p/n FG-WG38ST
Small on price, big on value!
Entry level wastegate for a performance enthusiast.
Rated to intermittent 850 degrees C. Designed with
the budget-conscious street enthusiast in mind.
Investment
cast stainless steel body
One-piece
stainless steel billet valve for extra strength
and reliability
Silicone
Nomex diaphragm
Unique
temperature isolation zone
Fully
compatible with all Turbosmart Boost Controllers
Comes
complete with a 7psi spring |
| |
|
 |
Bov Type 1
P/N: FG-BOV-001
The Type 1 BOV is best suited to engines up to 1.5
litres in capacity, producing standard or mildly
increased boost.
Also available in Sleeper Series |
| |
|
 |
Vee Port
P/N: FG-BOV-002VP
Features the unique variable exhaust port system,
resulting in superior venting of excess pressure,
a popular choice for the street.
Also available as a direct fit for Subaru WRX (incl
STi) 2001-current
P/N: FG-BOV-WRXVP
Also available in Sleeper Series |
| |
|
 |
Plumb Black
P/N: FG-BOV-003PB25 25mm outlet
P/N: FG-BOV-003PB29 29mm outlet
P/N: FG-BOV-003PB32 32mm outlet
P/N: FG-BOV-003PB34 34mm outlet
P/N: FG-BOV-003PB38 38mm outlet
For the serious enthusiast NOT wanting to be noticed,
the Plumb Back BOV allows all pressure to be vented
back into the intake system.
Also available as a direct fit for Subaru WRX (incl
STi) 2001-current and Subaru Liberty GT
P/N: FG-BOV-WRXPB
P/N: FG-BOV-LBGTPB
Also available in Sleeper Series |
| |
|
 |
Dual Port
P/N: FG-BOV-003DP25 25mm outlet
P/N: FG-BOV-003DP29 29mm outlet
P/N: FG-BOV-003DP32 32mm outlet
P/N: FG-BOV-003DP34 34mm outlet
P/N: FG-BOV-003DP38 38mm outlet
A BOV that will vent to atmosphere and back into
the air intake. Dual ports with sequential timing
allow quieter operation during normal driving loads
with the benefit of a Supersonic during race conditions.
Supplied with parts to convert between Plumb Back
and Supersonic.
Also available as a direct fit for Subaru WRX (incl
STi) 2001-current, Subaru Liberty GT and Mitsubishi
EVO VI, VII, VIII
P/N: FG-BOV-WRXDP
P/N: FG-BOV-LBGTDP
P/N: FG-BOV-EVODP
Also available in Sleeper Series |
| |
|
 |
Supersonic
P/N: FG-BOV-003SS
For the serious racer wanting to be NOTICED. Widely
used in both the show and race scene worldwide.
Also available as a direct fit for Subaru WRX (incl
STi) 2001-current and Subaru Liberty GT
P/N: FG-BOV-WRXSS
P/N: FG-BOV-LBGTSS
Also available in Sleeper Series |
| |
|
 |
Megasonic
P/N: FG-BOV-003MS
This BOV is now the highest flowing in our range,
out flowing most BOV’s available,
ideal for the serious racer. It also caters for
the show cars that wish to stand out from the crowd.
Also available in Sleeper Series |
| |
|
 |
Kompact Plumb Back
P/N: FG-BOV-KTPB25
P/N: FG-BOV-KTPB20 |
| |
|
 |
Kompact Supersonic
P/N: FG-BOV-KTSS25
P/N: FG-BOV-KTSS20 |
| |
|
 |
Kompact Dual Port
P/N: FG-BOV-KTDP25
P/N: FG-BOV-KTDP20 |
| |
|
 |
Kompact Audi 2.7 litre V6
Twin Turbo
P/N: FG-BOV-KTDPV6 |
| |
|
 |
Multi Fit Adapters
Hose Adapters
Hose Adapter - suit 19mm ID hose P/N: FG-ADA-HO19
Hose Adapter - suit 25mm ID hose P/N: FG-ADA-HO25
Hose Adapter - suit 32mm ID hose P/N: FG-ADA-HO32
Hose Adapter - suit 34mm ID hose P/N: FG-ADA-HO34
Hose Adapter - suit 38mm ID hose P/N: FG-ADA-HO38
Hose Tee Adapters
Hose Tee Adapter - suit 2.0" ID hose P/N: FG-ADA-HT200
Hose Tee Adapter - suit 2.5" ID hose P/N: FG-ADA-HT250
Hose Tee Adapter - suit 3.0" ID hose P/N: FG-ADA-HT300
Blanking Plugs
19mm ID Hose Blanking Plug P/N: FG-ADA-BLNK19
25mm ID Hose Blanking Plug P/N: FG-ADA-BLNK25
29mm ID Hose Blanking Plug P/N: FG-ADA-BLNK29
32mm ID Hose Blanking Plug P/N: FG-ADA-BLNK32
34mm ID Hose Blanking Plug P/N: FG-ADA-BLNK34
38mm ID Hose Blanking Plug P/N: FG-ADA-BLNK38
Greddy Type S & R Adapter fits to existing flanges.
P/N: FG-ADA-GREDDY
HKS SSQ Adapter
fits to existing flanges.
P/N: FG-ADA-HKS- SSQ
BOV adapter
block off cap suits all Turbosmart BOV adaptors.
P/N: FG-ADA-CAP
Weld-on Stainless
Steel adapter as supplied with all Multi-Fit BOV's.
P/N: FG-ADA- SS38
Weld-on Aluminium
adapter
P/N: FG-ADA-WA38
Universal 90 degree
elbow adapter
P/N: FG-ADA-UELB
Weld-on Stainless Steel 90 degree elbow adapter
P/N: FG-ADA-SELB |
| |
|
 |
Model Specific Adapters
Daihatsu COPEN Adapter Kit P/N: FG-ADM-COPEN
Ford XR6 Turbo Pipe Kit P/N: FG-ADM-XR6
Mitsubishi 300GT Adapter Kit P/N: FG-ADM-3000GT
Mitsubishi Eclipse Gen1 Adapter Kit (USA & Canada
Only) P/N: FG-ADM-ECL1
Mitsubishi Eclipse Gen 2 Adapter Kit (USA &
Canada Only) P/N: FG-ADM-ECL2
Nissan Pulsar GTI-R Adapter Kit P/N: FG-ADM-GTIR
Nissan 180SX-S13, CA18 Pipe Kit P/N: FG-ADM-180SXCA
Nissan R32 SKYLINE GTS-t BOV Adapter Kit P/N: FG-ADM-R32
Nissan 200SX, S14 & S15 Pipe Kit P/N: FG-ADM-200SX
Plumb Back Connection Kit P/N: FG-ADM-200SXPBK
Nissan 180SX-S13, SR20 Pipe Kit P/N: FG-ADM-180SXSR
Nissan R33 SKYLINE GTS-t BOV Adapter Kit P/N: FG-ADM-R33
Plumb Back Connection Kit P/N: FG-ADM-R33PBK
NISSAN 300ZX TT Adapter Kit P/N: FG-ADM-300ZX
Subaru Liberty/Legacy Adapter Kit P/N: FG-ADM-LIBRS
Subaru Liberty/Legacy B4 (BE5) Twin Turbo 02'/03'
Adapter Kit P/N: FG-ADM-LBB4
Subaru WRX 99'/00' Adapter Kit P/N: FG-ADM-MY99
Subaru Forester GT 01'/02' 2.0 Litre Adapter Kit
P/N: FG-ADM-FRST20
Subaru Forester XT 03'/04' 2.5 Litre Adapter Kit
P/N: FG-ADM-FRST25
Subaru WRX 97'/98' Adapter Kit P/N: FG-ADM-MY98
Smart-Fortwo & Roadster Pipe Kit P/N: FG-ADM-SMART
Toyota MR2 Adapter Kit P/N: FG-ADM-MR2
Toyota Supra JZA80 Pipe Kit P/N: FG-ADM-SUPRA
Toyota Soarer 2.5TT Pipe Kit P/N: FG-ADM-SOARER
Toyota Starlet Adapter Kit P/N: FG-ADM-STAR |
| |
|
 |
Boost Tee
p/n: FG-GBCV-BT
Set
your Boost and forget it
Boost
is fully adjustable from under the bonnet
Detent
System for ease of adjustment
Gated
System to bring boost on faster
Can
be mounted with an optional mounting bracket
Mounting Bracket - BOOST TEE only
p/n: FG-GBCV-BKT
Anodised
billet aluminium
Supplied
with all mounting hardware |
| |
|
 |
In Cabin
p/n: FG-GBCV-IC
Designed to be mounted inside the cabin and allows
for boost adjustment on the run. Ideal for the active
enthusiast.
Control
boost from the drivers seat
Detent
System for ease of adjustment
Gated
System to bring boost on faster
Mounting
bracket, hose and all fitting hardware supplied
|
| |
|
 |
SINGLE STAGE - Improved!
p/n: FG-GBCV-SS
Compact design, will fit in the palm of your hand.
This unit provides fast boost response with one
adjustable boost level. Ideal for turbo cars without
factory boost controllers. Switch between standard
and high boost.
High
Boost setting is fully adjustable
Detent
System for ease of adjustment
Gated
System to bring boost on faster
Includes
Rocket Launcher Switch and fitting hardware
Mounting
bracket and fittings supplied |
| |
|
 |
Dual Stage - Improved!
p/n: FG-GBCV-DS
Compact design, will fit in the palm of your hand.
This unit provides fast boost response with two
adjustable boost levels. Just toggle between high
and low on the fly. Ideal for replacing factory
boost controllers.
Low
and high Boost settings are fully adjustable
Detent
System for ease of adjustment
Gated
System to bring boost on faster
Includes
Rocket Launcher Switch and fitting hardware
Mounting
bracket and fittings supplied |
| |
|
 |
Rocket Launcher Switch
p/n: FG-ROCKETSW
As
supplied with our Switchable Gated Boost Control
Valves
10
Amp toggle switch with aircraft safety cover
Ideal
for switching driving lights, Nitrous kits or any
other accessory
Comes
with sticker sheet - LIGHTS, NITROUS, TURBO, BOOST,
LAUNCH & POWER |
| |
|
 |
Boost Controller Fitting
Kit
This kit includes everything required to
install a Boost Controller to an engine
Suited
to all Turbosmart Boost Controllers
500mm
(19.7 inch) Turbosmart silicon hose
Four
spring-clip hose clamps and four cable ties
Please
specify hose colour |
| |
|
 |
Twin Turbo hook up kit
This kit allows any Turbosmart Boost Controller
to be connected to two wastegates.
For
parallel twin turbos only - not suited to sequential
turbo applications
Supplied
with hose, clamps and fittings required to connect
to wastegate actuators |
| |
|
 |
Pneumatic Fuel Cut Defender
p/n: FG-FCD-001
Accurately increase the factory fuel cut out when
increasing boost pressure, no cutting or splicing
wires.
Suited
to most turbo cars that use a MAP sensor to determine
the fuel cut level
Allows
you to increase the factory fuel cut, without effecting
off boost conditions
Can
be locked to prevent tampering
To
be used in conjunction with a Turbosmart Boost Controller
|
| |
|
 |
Electronic Fuel Cut Defender
p/n: FG-FCD-002
Accurately eliminate the factory fuel cut out when
increasing boost pressure.
Features
simple adjustment with L.E.D. indicator for easy
set-up
This
FCD has a compact water-resistant housing
Suitable
for under bonnet installation
To
be used in conjunction with a Turbosmart Boost Controller
|
| |
|
 |
Electronic Fuel Cut Defender
- Suits Nissan Skyline R32 and 300ZX
p/n: FG-FCD-002S
Accurately eliminate the factory fuel cut out when
increasing boost pressure.
Features
simple adjustment
This
FCD has a compact housing for under dash installation
only
To
be used in conjunction with a Turbosmart Boost Controller
|
